Ceramic wear liner construction method is generally used to paste the ceramic glue on the equipment.
There is also a welding hole plate way to fix, this construction method is more suitable for high temperature conditions, to ensure that the ceramic is not easy to fall off.
Before construction, we need to clean the surface of the equipment, rust, clean up the dust burr, keep the surface clean and then paste the ceramic liner. Ceramic glue is divided into two kinds of AB, according to the prescribed ratio for mixing evenly, avoid mixing too much, if the mixture is not used up, after solidification will lose adhesion. Alumina ceramic hole plate coated with glue, pay attention not to paint all around the hole to avoid blocking the hole.

The location of the hole is used to weld the iron sheet, to protect the welding joint, and then the small ceramic capping coated with glue glued to the iron sheet. Welded iron can play a secondary fixed role, so that the ceramic wear liner is more impact-resistant, ceramic is not easy to fall off, suitable for the material scouring force in the working conditions.
